High-quality EVJE EVJT electric vehicle charging cables designed for reliable performance and safety compliance.
Product Specifications
| Model Number | Specification | Stranded Outer Diameter (mm) | Conductor Resistance (Ω/km) |
| H07BZ-F | 3×1.5mm²+(0～2)×(0.5～0.75)mm² | 1.6 | 13.3 |
| H07BZ-F | 3×2.5mm²+(0～2)×(0.5～0.75)mm² | 2.1 | 7.98 |
| H07BZ-F | 3×4.0mm²+(0～2)×(0.5～0.75)mm² | 2.8 | 4.95 |
| H07BZ-F | 3×6.0mm²+(0～2)×(0.5～0.75)mm² | 3.5 | 3.30 |
| H07BZ-F | 3×10.0mm²+(0～2)×(0.5～0.75)mm² | 4.5 | 1.91 |
| H07BZ-F | 3×16mm²+(0～2)×(0.5～0.75)mm² | 5.7 | 1.21 |
| H07BZ-F | 5×2.5mm²+(0～2)×(0.5～0.75)mm² | 2.1 | 7.98 |
| H07BZ-F | 5×4.0mm²+(0～2)×(0.5～0.75)mm² | 2.8 | 4.95 |
| H07BZ-F | 5×6.0mm²+(0～2)×(0.5～0.75)mm² | 3.5 | 3.30 |
| H07BZ-F | 5×10.0mm²+(0～2)×(0.5～0.75)mm² | 4.5 | 1.91 |
| H07BZ-F | 5×16mm²+(0～2)×(0.5～0.75)mm² | 5.7 | 1.21 |
| H07BZ-F | 5×25mm²+(0～2)×(0.5～0.75)mm² | 7.2 | 0.78 |
| H07BZ-F | 5×35mm²+(0～2)×(0.5～0.75)mm² | 8.4 | 0.554 |
Company Profile
Linke Cable Technology Co., Ltd is a leading cable manufacturer and supplier in China with over 10 years of expertise in research, development, production, and marketing of wire and cable solutions.
Our Specializations
- EV charging cables
- Medical cables
- Silicone cables
- Spring cables
- Braided cables
- Towlobe cables
- UL certified wires
- Automotive cables
We employ an engineer-to-engineer approach to develop superior cable solutions that enhance product quality and improve daily life applications.
Our Team & Quality Assurance
Our engineering department features 6 experienced professionals with over 10 years of cable technology expertise, ensuring accurate and effective solutions. The quality control team of 10 specialists strictly supervises every step from raw materials to shipping, guaranteeing 100% product quality. Our production staff of over 50 skilled workers brings extensive manufacturing experience to every project.
Certifications & Standards
UL Certifications
UL1007
UL1330
UL1333
UL1591
UL1723
UL10064
UL10369
UL1015
UL1331
UL1569
UL1592
UL1672
UL10012
UL10269
UL10070
UL10483
UL1185
UL1332
UL1577
UL1901
Additional Certifications
ISO9001, ISO13485, TS16949, CNR Appliance Wiring Material standards including extruded PVC insulated single conductors rated 105ºC, 1000V, and various class and group certifications with FT1 and/or FT2 ratings.
| Brand | LINKE | Cross Section (mm²) | 0.01-500mm² |
| Wire Gauge (AWG) | [e.g., 24AWG, 28AWG] | Conductor | Tinned Copper /bare copper, based on client's requirements |
| Insulation material | PVC/TPU/Silicone rubber/PE/PP/XLPE/Nylon/other | Jacket Material | [PVC/PU/Rubber/Braid/etc.] |
| Certifications | RoHS/REACH/UL/CE/IP68/etc | Custom Length | [e.g., 1m, 3ft, 5m ±5% tolerance] |
| Cable Type | [Medical/Power/Audio/Coaxial/Electrical/Automotive/Energy storage//etc.] | Shielding | [Shielded/Unshielded/Braid Shield] |
| Impedance | [e.g., 75Ω (for coaxial cables)] | Printing/Logo | [Text/Label/Logo, max. 20 characters] |
| Bend Radius | [e.g., ≥5× cable diameter] | Current Rating | [e.g., 5A] |
| Voltage Rating | [e.g., 30V AC/DC] | Connector Material | [Gold-plated/Nickel-plated/Brass/etc.] |
| Connectors | [e.g., USB Type-C, 3.5mm Jack, RJ45] | Jacket | XLPE or PE or PVC RUBBER |
| Delivery Time | 7-14 days after confirming the order | Colors | [Black/White/Red/Custom Pantone/etc.] |
| temperature | Minus-70℃to 350℃(-70℃ ~ 350℃) | Package | Roll/box/plate/Custom |
| Supporting Services | multicolumn {3}{l}{custom cable, end to end solutions, including precise cutting, crimping and installation of lugs (specify material,e.g.,copper/nickel plated) |
|
|
Independent Laboratory • Complete Testing Equipment • Full Quality Control
We test every product by strict standards to ensure superior quality and reliable performance.
| No. | Test Item | Test Condition | Test Requirement | Test Data | Result |
| 1 | Structure Inspection | 1. Comply with wire size table2. Minimum thickness ≥ 80% of average thickness | Comply with wire size table | Refer to test record | Pass |
| 2 | Thermal Shock | Wind the sample on an iron rod of specified size, place in an aging oven at specified temperature for 1 hour, cool the sample to room temperature for at least 30 minutes, then observe the sample | No cracks on the sample surface | No cracks | Pass |
| 3 | Heat Deformation | 1. Measure sample thickness (mark measurement position)2. Place sample and test fixture in aging oven for preheating at specified temperature for 1 hour3. Place sample under pressure column of test fixture for 1 hour4. Re-measure sample thickness at the same position | 1. Sample shall not be cracked by pressure column or expose conductor2. Thickness reduction ≤ 50% | Refer to test record | Pass |
| 4 | FT2 | Apply a standard flame at a height of 125mm once | 1. Flame shall not propagate along its length2. Flame shall not spread to nearby flammable materials | Refer to test record | Pass |
| 5 | Aging | 1. Take five sections of 200mm-long sheath2. Place specimens in aging oven at 158℃ for 168 hours3. After taking out specimens, place at room temperature 23±5℃ for 16 hours, then test elongation at break and tensile strength | 1. Elongation before aging ≥ 300%, elongation after aging ≥ 80% of that before aging2. Tensile strength before aging > 1.41kg/mm², tensile strength after aging ≥ 80% of that before aging | Refer to test record | Pass |
| 6 | Cold Bend | Store sample in low-temperature box at specified temperature for 4 hours, wind sample on iron rod of specified size with specified turns, complete winding within 30 seconds after sample is taken out of low-temperature box | No cracks on the sample surface | No cracks | Pass |
| 7 | Conductor Resistance | Measure resistance of one-meter core conductor with DC resistance meter | At 20℃, resistance of 8AWG ≤ 2.23Ω/km | Refer to test record | Pass |
Linke cable technology (DongGuan) Co. Ltd. concentrate on R&D and
provide professional solutions to the Cable&Wire,especially for the
different industry customers.It contains :
Humanoid robot cable,
AI power cable/data cable,
Semiconductor cable/industrial automatic cable,
Sensor cable,
New energy cable,
Medical beauty wire,
UL wire cable,
Linke Cable has diversified product development capabilities and technical capabilities to support diversified
customer needs. We have obtained the following product authorization:UL 758,CCC,RoHs,REACH,CE; We
have obtained the following quality management system:ISO 9001-2015(All products); ISO 13485
(Medical apparatus and instruments),IATF 16949(Auto industry)
Frequently Asked Questions
Are you a manufacturer or trading company?
We are a professional manufacturer controlling your order from beginning to end. Welcome to visit us - we'll provide transportation from Shenzhen.
How can I get a sample to test your quality?
Samples are free for evaluation. New clients are expected to pay for courier costs.
What's your Minimum Order Quantity?
Normally 100m. Due to cable weight, we recommend ordering suitable quantities to optimize freight costs. Sea transportation is the most economical option.
Can I get a discount?
Discounts are available based on order quantity. Please contact us for detailed pricing and freight arrangements.
Does your company accept OEM production?
Yes, we offer OEM services including company name printing and custom quality cards to promote your brand.
For More Information, Please Feel Free to Contact Us!
